Chitosan microparticles loaded with essential oils inhibit duo-biofilms of Candida albicans and Streptococcus mutans.

OBJECTIVE: Oral candidiasis is a common fungal infection that affects the oral mucosa, and happens when Candida albicans interacts with bacteria in the oral microbiota, such as Streptococcus mutans, causing severe early childhood caries. C. albicans and S. mutans mixed biofilms are challenging to treat with conventional antimicrobial therapies, thus, new anti-infective drugs are required. This study aimed to test a drug delivery system based on chitosan microparticles loaded with geranium and lemongrass essential oils to inhibit C. albicans and S. mutans mixed biofilms. METHODOLOGY: Chitosan microparticles loaded with essential oils (CM-EOs) were obtained by spray-drying. Susceptibility of planktonic were performed according CLSI at 4 to 2,048 µg/mL. Mixed biofilms were incubated at 37ºC for 48 h and exposed to CM-EOs at 256 to 4,096 µg/mL. The antimicrobial effect was evaluated using the MTT assay, with biofilm architectural changes analyzed by scanning electron microscopy. RAW 264.7 cell was used to evaluate compound cytotoxicity. RESULTS: CM-EOs had better planktonic activity against C. albicans than S. mutans. All samples reduced the metabolic activity of mixed C. albicans and S. mutans biofilms, with encapsulated oils showing better activity than raw chitosan or oils. The microparticles reduced the biofilm on the slides. The essential oils showed cytotoxic effects against RAW 264.7 cells, but encapsulation into chitosan microparticles decreased their toxicity. CONCLUSION: This study demonstrates that chitosan loaded with essential oils may provide an alternative method for treating diseases caused by C. albicans and S. mutans mixed biofilm, such as dental caries.

Chitosan microparticles loaded with essential oils inhibit duo-biofilms of Candida albicans and Streptococcus mutans

Abstract Oral candidiasis is a common fungal infection that affects the oral mucosa, and happens when Candida albicans interacts with bacteria in the oral microbiota, such as Streptococcus mutans, causing severe early childhood caries. C. albicans and S. mutans mixed biofilms are challenging to treat with conventional antimicrobial therapies, thus, new anti-infective drugs are required. Objective This study aimed to test a drug delivery system based on chitosan microparticles loaded with geranium and lemongrass essential oils to inhibit C. albicans and S. mutans mixed biofilms. Methodology Chitosan microparticles loaded with essential oils (CM-EOs) were obtained by spray-drying. Susceptibility of planktonic were performed according CLSI at 4 to 2,048 µg/mL. Mixed biofilms were incubated at 37ºC for 48 h and exposed to CM-EOs at 256 to 4,096 µg/mL. The antimicrobial effect was evaluated using the MTT assay, with biofilm architectural changes analyzed by scanning electron microscopy. RAW 264.7 cell was used to evaluate compound cytotoxicity. Results CM-EOs had better planktonic activity against C. albicans than S. mutans. All samples reduced the metabolic activity of mixed C. albicans and S. mutans biofilms, with encapsulated oils showing better activity than raw chitosan or oils. The microparticles reduced the biofilm on the slides. The essential oils showed cytotoxic effects against RAW 264.7 cells, but encapsulation into chitosan microparticles decreased their toxicity. Conclusion This study demonstrates that chitosan loaded with essential oils may provide an alternative method for treating diseases caused by C. albicans and S. mutans mixed biofilm, such as dental caries.

Virucidal PVP-Copper Salt Composites against Coronavirus Produced by Electrospinning and Electrospraying.

Electrospinning technology was used to produced polyvinylpyrrolidone (PVP)-copper salt composites with structural differences, and their virucidal activity against coronavirus was investigated. The solutions were prepared with 20, 13.3, 10, and 6.6% w/v PVP containing 3, 1.0, 0.6, and 0.2% w/v Cu (II), respectively. The rheological properties and electrical conductivity contributing to the formation of the morphologies of the composite materials were observed by scanning electron microscopy (SEM). SEM images revealed the formation of electrospun PVP-copper salt ultrafine composite fibers (0.80 ± 0.35 µm) and electrosprayed PVP-copper salt composite microparticles (1.50 ± 0.70 µm). Energy-dispersive X-ray spectroscopy (EDS) evidenced the incorporation of copper into the produced composite materials. IR spectra confirmed the chemical composition and showed an interaction of Cu (II) ions with oxygen in the PVP resonant ring. Virucidal composite fibers inactivated 99.999% of coronavirus within 5 min of contact time, with moderate cytotoxicity to L929 cells, whereas the virucidal composite microparticles presented with a virucidal efficiency of 99.999% within 1440 min of exposure, with low cytotoxicity to L929 cells (mouse fibroblast). This produced virucidal composite materials have the potential to be applied in respirators, personal protective equipment, self-cleaning surfaces, and to fabric coat personal protective equipment against SARS-CoV-2, viral outbreaks, or pandemics.

The effects of the molecular weight of chitosan on the tissue inflammatory response.

The molecular weight of chitosan (CS) may affect its physical properties and its ability to induce an appropriate host response. The biocompatibilities of CS membranes of low (LMWCS) and high (HMWCS) molecular weight were investigated by inserting these materials into the subcutaneous tissue of rats for 1-28 days and evaluating leukocyte infiltration, granulation tissue, fibrosis, arginase-1 immunostaining, as well as nuclear factor-κB (NF-κΒ) and fibroblast growth factor (FGF)-2 expressions. Both CS membranes induced a peak of leukocyte infiltration on the first day of insertion and stimulated granulation and fibrous tissue generation when compared to control. LMWCS induced more collagen deposition a week earlier, when compared to the control and HMWCS membrane. The membranes also increased arginase-1 immunostaining, a M2 macrophage marker. M2 macrophage is recognized as anti-inflammatory and pro-regenerative. NF-κB is an essential biomarker of the inflammatory process and induces the expression of several pro-inflammatory cytokines. The LMWCS membrane reduced inflammation, as indicated by a reduced nucleus/cytoplasm NF-κB ratio in surrounding tissue from days 7 to 14 when compared to control. On the first day, the expression of FGF-2, a biomarker of inflammatory resolution, was increased in the tissue of the LWMCS group, when compared with HMWCS, which was consistent with the type I collagen deposition. Thus, LWMCS was associated with a prior reduction of the inflammatory response and improved wound healing.

Essential oils encapsulated in chitosan microparticles against Candida albicans biofilms.

The aim of the study was to produce and characterize chitosan microparticles loaded with essential oils (CMEOs), evaluate the essential oil (EO) release profile and the CMEOs' anti-Candida activity. The chitosan microparticles (CMs) loaded with lemongrass essential oil (LEO) and geranium essential oil (GEO) were produced by the spray-drying method and characterized regarding CMEO morphological and physicochemical parameters and EO encapsulation efficiency (EE) and release profile. The planktonic activity was quantified by broth microdilution, and the activity against biofilm was quantified by biomass formation measurement. The LEO and GEO compositions were analyzed by gas chromatography combined with mass spectrometry (GC/MS), finding the main components citral (83.17%) and citronellol (24.53%). The CMs and CMEOs showed regular distribution and spherical shape (1 to 15 µm), without any morphological and physical modifications after EO incorporation. EE% ranged from 12 to 39%. In vitro release tests demonstrated the EO release rates, after 144 h, were 33% and 55% in PBS and HCl media, respectively. The minimum inhibitory concentration (MIC) values for CMEOs were lower than for CMs and pure EOs (P < 0.05). The higher CMEO biofilm inhibition percentage demonstrates the efficiency of microparticles against Candida biofilm. These results indicate that CMEOs are promising compounds that have antibiofilm activity against C. albicans.

Anti-acetylcholinesterase and toxicity against Artemia salina of chitosan microparticles loaded with essential oils of Cymbopogon flexuosus, Pelargonium x ssp and Copaifera officinalis.

Essential oils (EOs) are bioactive compounds with therapeutic potential for use as alternatives or as support to conventional treatments. However, EOs present limitations, such as sensibility to environmental factors, which can be overcome through microencapsulation. The objective of this study was to produce, by spray drying, chitosan microparticles (CMs) loaded with EO of Lemongrass (Cymbopogon flexuosus), Geranium (Pelargonium x ssp) and Copaiba (Copaifera officinalis). Physicochemical and biological characterization of these microparticles showed that CMs presented spherical morphology, had an average size range of 2-3 µm with positive zeta potential (ZP) values, and enhanced thermal stability, compared to free EO. The encapsulation efficiency (EE) ranged from 4.8-58.6%, depending on the oil's properties. In vitro EO release from CMs was determined at different pHs, with 94% release observed in acid media. All microparticles were non-hemolytic at concentrations of up to 0.1 mg·mL-1. EOs and CMs presented acetylcholinesterase (AChE) inhibition activity (IC 50 ranged from 11.92 to 28.18 µg·mL-1). Geranium and Copaiba EOs presented higher toxicity against Artemia salina, and greater inhibition of acetylcholinesterase, indicating potential bioactivity for Alzheimer's disease (AD). Our findings demonstrate that CM systems may show promise for the controlled release of these EOs.

Papain immobilization on heterofunctional membrane bacterial cellulose as a potential strategy for the debridement of skin wounds.

We combined the chemical and physical methods of papain immobilization through the aldehyde groups available on oxidized bacterial cellulose (OxBC) to provide high proteolytic activity for future applications as bioactive dressing. Bacterial cellulose (BC) was obtained by the fermentation of Komagataeibacter hansenii in Hestrin-Schramm medium for 5 days, followed by purification and oxidation using NaIO4. Surface response methodology was used to optimize papain immobilization (2%, w/v) for 24 h. The independent variables: pH (3-7) and temperature (5 to 45 °C) were investigated. The mathematically validated optimal conditions of 45 °C and pH 7 had a statistical effect on the immobilization yield (IY) of papain in OxBC (52.9%). These ideal conditions were also used for papain immobilization in BC (unoxidized). The IY of 9.1% was lower than that of OxBC. OxBC-Papain and BC-Papain were investigated using thermal analysis, confocal microscopy, and diffusion testing. The OxBC support exhibited a more interactive chemical structure than the BC support, and was capable of immobilizing papain by covalent bonds (-C-NHR) and adsorption (ion exchange), with 93.3% recovered activity, 49.4% immobilization efficiency, and better thermal stability. Papain immobilized to OxBC by adsorption displayed 53% widespread papain activity. The results indicate the potential of prolonged bioactivity in debrided chronic wounds.

Resorbable bacterial cellulose membranes with strontium release for guided bone regeneration.

Hybrid materials, based on bacterial cellulose (BC) and hydroxyapatite (HA), have been investigated for guided bone regeneration (GBR). However, for some GBR, degradability in the physiological environment is an essential requirement. The present study aimed to explore the use of oxidized bacterial cellulose (OxBC) membranes, associated with strontium apatite, for GBR applications. BC membranes were produced by fermentation and purified, before oxidizing and mineralizing by immersing in strontium chloride solution and sodium bibasic phosphate for 5 cycles. The hybrid materials (BC/HA/Sr, BC/SrAp, OxBC/HA/Sr and OxBC/SrAp) were characterized for biodegradability and bioactivity and for their physicochemical and morphological properties. In vitro cytotoxicity and hemolytic properties of the materials were also investigated. In vivo biocompatibility was analyzed by performing histopathological evaluation at 1, 3 and 9 weeks in mices. Results showed that the samples presented different strontium release profiles and that oxidation enhances degradation under physiological conditions. All the hybrid materials were bioactive. Cell viability assay indicated that the materials are non-cytotoxic and in vivo studies showed low inflammatory response and increased connective tissue repair, as well as degradation in most of the materials, especially the oxidized membranes. This study confirms the potential use of bacterial cellulose-derived hybrid membranes for GBR.

Papain immobilized on alginate membrane for wound dressing application.

Wound dressings based on natural polymers are of considerable interest in the pharmaceutical industry owing to their improved performance in the human body when compared to synthetic polymers. Alginate, a polysaccharide from brown algae, is commonly studied as a wound dressing owing to its biocompatibility and biodegradability. To improve its therapeutic features and thereby increase wound healing, papain (a proteolytic enzyme from Carica papaya latex) was proposed to be incorporated. Papain is capable of promoting the debridement of devitalized or necrotic tissues. The development of dressing based on alginate and papain aggregates the healing properties of both materials. In addition, the adsorption on a support can stabilize the enzyme structure and permits its release in a controlled manner. The optimal conditions for immobilization were evaluated (initial concentration, temperature, and pH), and the amount immobilized was measured by Bradford assay. The enzyme activity stability over 28 days was measured. The release profile was determined using Franz cell. In vitro cytotoxicity assays were performed using fibroblasts and keratinocytes. Optimal immobilization conditions were identified in a neutral medium at a papain concentration of 20 mg/mL and temperature of 25 °C. The enzyme remained active after immobilization (80 % of its initial activity), and the matrix protected the enzyme from deactivation (70 % reduction on the matrix compared to 94 % in a buffer solution). Franz cell displayed a release profile of 64.1 % of the enzyme after 24 h. The biological assays indicated a bioactive material with proteolytic properties.

In vitro degradability and bioactivity of oxidized bacterial cellulose-hydroxyapatite composites.

Hydroxyapatite-associated bacterial cellulose (BC/HA) is a promising composite for biomedical applications. However, this hybrid composite has some limitations due to its low in vivo degradability. The objective of this work was to oxidize BC and BC/HA composites for different time periods to produce 2,3 dialdehyde cellulose (DAC). The BC and oxidized BC (OxBC) membranes were mineralized to obtain the hybrid materials (BC/HA and OxBC/HA) and their physico-chemical, degradability, and bioactivity properties were studied. The results showed that OxBC/HA was more bioactive and degradable than BC/HA, which isa function of the degree of BC oxidation. High glucose levels in the BC degradation were observed as a function of oxidation degree, and other products, such as butyric acid and acetic acid resulted from DAC degradation. Therefore, this chemical modification reaction favors BC degradation, making it a good biodegradable and bioactive material with a potential for bone regeneration applications.

Antifungal activity of different molecular weight chitosans against planktonic cells and biofilm of Sporothrix brasiliensis.

Sporotrichosis, caused by Sporothrix schenckii complex species, is the most prevalent subcutaneous mycosis in many areas of Latin America. Chitosan has been used as an antifungal agent; however the effects of the molecular weight (MW) of chitosan (i.e. high (HMW), medium (MMW) and low (LMW) molecular weight chitosan) on S. brasiliensis has not been well described, particularly on biofilms. Effects on the planktonic form activity of S. brasiliensis were quantified by broth microdilution, while anti-biofilm activity was quantified by measuring metabolic activity via XTT (2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5-[(phenylamino)carbonyl]-2H-tetrazolium hydroxide and biomass formation (crystal violet). The molecular weight of chitosan modulated its effect on the planktonic form of S. brasiliensis, presenting lower MIC values for LMW chitosan. With regards both the adhesive and mature phases of biofilm, the LMW chitosan reduced biomass and metabolic activity most effectively. This study confirms the effects of the molecular weight and deacetylation degree of chitosan on its antifungal properties for potentially pathogenic fungi.

Effect of the molecular weight of chitosan on its antifungal activity against Candida spp. in planktonic cells and biofilm.

Difficulties in the treatment of Candida spp. invasive infections are usually related to the formation of biofilms. The aim of this study was to determine the effects of molecular weight (MW) of chitosan (using high (HMW), medium (MMW) and low (LMW) molecular weight chitosan) on Candida albicans, Candida tropicalis and Candida parapsilosis sensu stricto. The deacetylation degree (DD) and molecular weight M were measured by potentiometric titration and viscosimetry, respectively. The planktonic shape activity was quantified by broth microdilution, and the activity against biofilm was quantified by metabolic activity through XTT 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5-[(phenylamino)carbonyl]- 2H-tetrazolium hydroxide and biomass formation (crystal violet). The influence of chitosan MW on the planktonic form of Candida spp. was strain dependent. Fungal growth decreased with increasing chitosan MW for C. tropicalis and C. parapsilosis, while chitosan MW did not modulate the effect for C. albicans. With regard to the formation of biofilms, in both the adhesion and mature phases, the biomass and metabolic activities of Candida spp. were reduced by about 70% and 80%, respectively for each phase.

Versatility of Chitosan-Based Biomaterials and Their Use as Scaffolds for Tissue Regeneration.

Chitosan is a naturally occurring polysaccharide obtained from chitin, present in abundance in the exoskeletons of crustaceans and insects. It has aroused great interest as a biomaterial for tissue engineering on account of its biocompatibility and biodegradation and its affinity for biomolecules. A significant number of research groups have investigated the application of chitosan as scaffolds for tissue regeneration. However, there is a wide variability in terms of physicochemical characteristics of chitosan used in some studies and its combinations with other biomaterials, making it difficult to compare results and standardize its properties. The current systematic review of literature on the use of chitosan for tissue regeneration consisted of a study of 478 articles in the PubMed database, which resulted, after applying inclusion criteria, in the selection of 61 catalogued, critically analysed works. The results demonstrated the effectiveness of chitosan-based biomaterials in 93.4% of the studies reviewed, whether or not combined with cells and growth factors, in the regeneration of various types of tissues in animals. However, the absence of clinical studies in humans, the inadequate experimental designs, and the lack of information concerning chitosan's characteristics limit the reproducibility and relevance of studies and the clinical applicability of chitosan.

In vitro evaluation of anti-calcification and anti-coagulation on sulfonated chitosan and carrageenan surfaces.

In recent years, great effort has been devoted to the development of biomaterials that come into contact with blood. The surfaces of these materials need to be of suitable mechanical strength, and present anti-thrombogenic and anti-calcification properties. Chitosan is a natural polymer that has attracted attention due to its potential to act as a biomaterial. However, chitosan contains amino groups in its structure that may promote thrombogenesis and calcification. A strategy to reduce these properties constitutes the introduction of sulfonate groups (R-SO3-) in the chitosan chain. Another interesting biopolymer with similar characteristics to those of heparin is carrageenan, which has sulfate groups in its structure. As such, we evaluated "in vitro" calcification and thrombogenic processes on surfaces of pristine and sulfonated chitosan and on polyelectrolyte complexes (PEC) of chitosan and carrageenan. Results indicate that PEC demonstrate significant reductions in calcification and thrombogenic potential, probably due to the presence of sulfonate groups in both the carrageenan and treated chitosan.

Characterization of calcium oxide catalysts from natural sources and their application in the transesterification of sunflower oil.

The catalytic activities of calcium oxide obtained from natural sources (crab shell and eggshell) were characterized and evaluated in the transesterification of vegetable oil. These catalysts are mainly composed of calcium carbonate, which is partially converted into CaO after calcination (900°C for 2h). The catalysts have some advantages, such as abundant occurrence, low cost, porous structure, and nontoxic. The materials were characterized by XRD, FTIR, TG/DTG, CO2-TPD, XPS, SEM, and BET methods. The thermal treatment produces small particles of CaCO3 and CaO that are responsible for the catalytic activity. The conversion from triglycerides to methyl ester was not observed in transesterification carried out using natural crab shell and eggshell. Under optimized reaction conditions, the conversions to YFAME using the calcined catalysts were: crab shell (83.10±0.27 wt.%) and eggshell (97.75±0.02 wt.%). These results, showed that these materials have promising viability in transesterification for biodiesel production.